发光铱(Ⅲ)配合物抗肿瘤活性研究及应用

铱(Ⅲ)配合物因其发光量子产率高且波长易调控、发光寿命长和光稳定性好的特点,在发光材料领域备受关注。铱(Ⅲ)配合物细胞渗透能力强,能靶向多种细胞组织并影响其结构和功能,表现出独特的抗肿瘤活性,是目前金属抗肿瘤药物特别是PDT光敏剂方向的研究热点。本文重点关注铱(Ⅲ)配合物的结构对其发光性能与抗肿瘤性能的影响,综述了近期铱(Ⅲ)配合物在生物成像、探针与传感、抗肿瘤诊疗等领域的研究进展,并对目前研究中存在的问题及其应用前景进行探讨和展望。     

CCSD(T) study on the structures and chemical bonds of AnO molecules (An = Bk–Lr)

The molecular geometries and dissociation energies of AnO (An = Bk–Lr) molecules were first obtained at thecoupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] level of theory. Four hybrid functionals,B3LYP, M06-2X, TPSSh, and PBE0, were also employed in the calculations for the sake of comparison. In comparison ofthe CCSD(T) results, B3LYP, TPSSh, and PBE0 functionals can obtain more appropriate results than M06-2X and MP2.The analyses on molecular orbitals show that the 7s, 6d, and 5f atomic orbitals of actinide (An) atoms participate in thebonding of An–O bonds. The partial covalent nature between An and O atoms is revealed by QTAIM analyses.     

Maltol as a Novel Agent Protecting SH-SY5Y Cells Against Hemin-induced Ferroptosis

Ferroptosis triggered by hemin is regarded as a primary factor accounting for neuronal death secondary to intracerebral hemorrhage. Thus, compounds with inhibitory effect on hemin-induced ferroptosis might be potential medicines to prevent neuronal death caused by intracerebral hemorrhage. Herein, we investigate whether maltol could alleviate hemin-induced SH-SY5Y cell ferroptosis and its potential mechanisms. It is found that maltol effectively prevents hemin-induced SH-SY5Y cell ferroptosis via three pathways. The first one is inhibiting intracellular iron increase via preventing upregulation of transferrin receptor, the second one is alleviating lipid peroxidation via attenuating H₂O₂ generation by NOX4 and promoting H₂O₂ clearance by catalase, and the third one is to reduce peroxidized lipids via maintaining GPX4/GSH pathway. Therefore, maltol is a novel agent preventing hemin-induced SH-SY5Y cell ferroptosis.     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

Miktoarm star‐shaped poly(lactic acid) copolymer: Synthesis and stereocomplex crystallization behavior

The miktoarm star‐shaped poly(lactic acid) (PLA) copolymer, (PLLA)₂‐core‐(PDLA)₂, was synthesized via stepwise ring‐opening polymerization of lactide with dibromoneopentyl glycol as the starting material. ¹H NMR and FTIR spectroscopy proved the feasibility of synthetic route and the successful preparation of star‐shaped PLA copolymers. The results of FTIR spectroscopy and XRD showed that the stereocomplex structure of the copolymer could be more perfect after solvent dissolution treatment. Effect of chain architectures on crystallization was investigated by studying the nonisothermal and isothermal crystallization of the miktoarm star‐shaped PLA copolymer and other stereocomplexes. Nonisothermal differential scanning calorimetry and polarizing optical microscopy tests indicated that (PLLA)₂‐core‐(PDLA)₂ exhibited the fastest formation of a stereocomplex in a dynamic test due to its special structure. In isothermal crystallization tests, the copolymer exhibited the fast crystal growth rate and the most perfect crystal morphology. The results reveal that the unique molecular structure has an important influence on the crystallization of the miktoarm star‐shaped PLA copolymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 814–826     

高效液相色谱-荧光检测器法测定2-噁唑烷酮的含量

建立一种利用高效液相色谱结合荧光检测器准确测定2-噁唑烷酮含量的方法。样品中的2-噁唑烷酮和占吨氢醇在60℃的条件下衍生70 min后,直接进样分析。采用月旭XB-C18色谱柱,流动相为0.02 mol/L乙酸钠水溶液和乙腈,检测器波长为λex=213 nm,λem=308 nm,流速1.0 mL/min,柱温35℃的条件下。2-噁唑烷酮浓度在0.5~50.0mg/mL时,线性关系良好(R2=0.9995),检测限和定量限分别为0.005 mg/L、0.016 mg/L。该方法准确、灵敏、快速,适用于2-噁唑烷酮含量的检测。     

Orientably-regular embeddings of a class of multipartite graphs

The orientably-regular embeddings of complete multipartite graphs have been determined by the contributions of several papers. After that, a natural question can be asked: How about the regular embeddings of the multipartite graphs with m parts, while each part contains n vertices(not necessarily complete multipartite). In this paper, we classify all the orientably-regular embeddings of these graphs when m is a prime q and n is a prime power pe.     

超声筛查早期诊断婴儿发育性髋关节异常的临床管理

目的 了解鄞州区0~6月龄婴儿发育性髋关节异常（developmental dysplasia of hip,DDH）的流行病学特征，探讨DDH 的临床管理模式。方法 由鄞州区妇幼保健机构社区医师和鄞州区第二医院围生医生共同负责完成DDH 的临床初筛工作，可疑或异常者转儿科进一步检查，并予B 超筛查，对不同人群分别进行早期干预、复查、随访及骨盆正位X 线片检查，必要时转小儿骨科治疗。结果 2012 年5 月至2013 年5 月，共6 890 例0~6月龄婴儿进行髋关节B 超筛查，初筛阳性率5.73%（395/6 890），复查阳性率0.59%（34/5729）；月龄越小筛查阳性率越高，差异有统计学意义（P＜0.05）。新生儿及1~3月龄婴儿初筛阳性率高，但复查阳性率明显降低，差异有统计学意义（P＜0.05）；4~6月龄婴儿初筛及复查阳性率差异无统计学意义（P ＞0.05）。结论 鄞州区采取的社区门诊检查- 区医院儿科复查-B 超筛查及转诊治疗的管理模式，可作为基层推进DDH 的早发现和早治疗的有效手段。     

(4R,5R)-1,3-二氧戊环-2,2-二苯基-4,5-二-[亚甲基-N,N'-(1-甲基-4-羟基苯甲醛)]的合成及其催化性能

以L-酒石酸和二苯甲酮为原料,经酯化、缩酮、加成、消除、还原和缩合等反应合成了一种新型席夫碱类化合物——(4R,5R)-1,3-二氧戊环-2,2-二苯基-4,5-二-[亚甲基-N,N'-(1-甲基-4-羟基苯甲醛)](4),其结构经1H NMR,13C NMR和LC-MS表征。以二烷基锌对苯甲醛的不对称加成为模板反应,考察了4的不对称催化性能。实验结果表明,4对该反应具有一定的催化效果(ee值52%)。     

PN结物理特性的开放式测量实验方法研究

开放式、综合性量测实验的设计与应用,在巩固基础理论知识的同时,能够有效培养学生的动手实践能力、数据处理及分析能力,一定程度代表着大学物理实验课程的教学模式改革方向。以PN结物理特性的测量实验为例,基于通用型仪器与元器件的积木式组合,设计出简单、适用的实验电路;t=17.95℃时所采集的原始实验数据经三种模式回归分析,比较验证了PN结扩散电流与电压间遵循的玻尔兹曼分布律;计算出的玻尔兹曼常数与FD-PN-4测定仪的量测值相比,其结果说明了开放式测量实验方法的有效性。